 |
|
 |
|
|||||||||||||||||||||
|
|
||||||||||||||||||||||||
 |
||||||||
|
|
|
|
|
|
|||
 |
 |
 |
||||||
|
1. How do I get the vision mixer to do basic cuts and mix´s? 2. How do I get the downstreamkeyer to work? 3. How do I get the auto cue to scroll? 4. How do I get the lights to work? |
||||||||
|
ANSWERS How do I get the vision mixer to do basic cuts and mix's? Ans: Use the bottom (red) bank and the preset bank (white) above it and the T bar (fader) to the immediate right of these. How do I get the downstream keyer to work? Ans: Select Capt.1 for the clock or Capt.2 for the Aston and use the level control to set the keying level and then fade in or out with the T bar. How do I get the Auto-cue to scroll? Ans: Make sure that the display shows REM at the bottom right hand part of the screen.Use the curser arrows to set it. Then operate the thumb wheel on the remote box. How do I get the lights to work? Ans: Make sure the controller is plugged in. Ensure timer is at Zero. Black out ON. Lower or upper sub masters at 10. Grand master at Maximum. Bring up individual faders on upper or lower banks. Can´t find what you´re looking for? EMAIL us and we´ll add it to the list for others to benefit.
|
||||||||